Two-Component Neutral Structural Silicone Sealant For insulating 6351-Ⅱ
Product Description
Pustar Two-component Silicone Structural Glazing Adhesive is a high performance sealant suitable for sealing, bonding, repairing and mending of glass and window construction, double glazing in windows, aquariums, shower screens and sanitary ceramics.
Neutral structural silicone sealant exhibits an excellent adhesion to glass tiles ceramics, fibreglass,aluminum, no-oily woods, painted surfaces, plastics and other non-porous surfaces.
Areas of Application
Mainly used for two-way bonding and sealing of non-structural insulating glass.
Specification
Component A: 190L drum
Component B: 19L drum
Technical Data
| Technical Data① 6351-Ⅱ | |||
| Items | Standard | Typical Value |
|
| Appearance | A:White homogeneous paste |
/ | |
| B:Black homogeneous paste |
|||
| Mixing ratio(volume) | A:B=10:1 | A:B=10:1 | |
| Density(g/cm³) GB/T 13477.2 |
A:1.6±0.1 | A:1.6±0.1 | |
| B:1.0±0.1 | B:1.0±0.1 | ||
| Sagging properties(mm) GB/T 13477.6 |
≤3 | 0 | |
| Application time(h) | ≥20 | 55 | |
| Tack free time(min) GB/T 13477.5 |
≤2 | 1.2 | |
| Shore A-hardness GB/T 531.1 |
30～60 | 40 | |
| Tensile adhesion GB/T 29755 |
Tensile Strength(Mpa) | ≥0.5 | 0.6 |
| Elongation at max. Tensile strength(h) |
≥50 | 60 | |
| Adhesion Failure Area(%) |
≤10 | 0 | |
| Heat aging(%) GB/T 29755 |
≤10 | 0 | |
| Adhesion with glass | 100%CF | 100%CF | |
①All data above were tested under standardized condition at 23±2°C, 50±5%RH.
②Value of tack free time would be affected by change of environmental temperature and humidity.
Other Details
Construction Sealant
Guangdong Pustar Adhesives & Sealants Co., Ltd. is a professional manufacturer of polyurethane sealant and adhesive in China. The company integrates scientific research, production and sales. It not only has its own R&D technology center, but also cooperates with many universities to build a research and development application system.
The self-owned brand “PUSTAR” polyurethane sealant has been highly praised by customers for its stable and excellent quality. In the second half of 2006, in response to changes in market demand, the company expanded the production line in Qingxi, Dongguan, and the annual production scale has reached more than 10,000 tons.
For a long time, there has been an irreconcilable contradiction between technical research and industrial production of polyurethane sealing materials, which has restricted the development of the industry. Even in the world, only a few companies can achieve large-scale production, but because of their super strong Adhesive and sealing performance, its market influence is gradually expanding, and the development of polyurethane sealant and adhesives surpassing traditional silicone sealants is the general trend.
Following this trend, Pustar Company has pioneered the “anti-experiment” manufacturing method in the long-term research and development practice, opened up a new road to large-scale production, cooperated with a professional marketing team, and has spread all over the country and exported to the United States, Russia and Canada. And Europe, the application field is popular in automobile manufacturing, construction and industry.
Hose sealant use steps
Expansion joint sizing process steps.
Prepare construction tools: special glue gun ruler fine paper gloves spatula knife Clear glue utility knife brush rubber tip scissors liner.
Clean the sticky base surface.
Lay the padding material (polyethylene foam strip) to ensure that the depth of the padding is about 1 cm from the wall.
Pasted paper to prevent sealant contamination of non-construction parts.
Cut the nozzle crosswise with a knife.
Cut the sealant opening.
Into the glue nozzle and into the glue gun.
The sealant is uniformly and continuously extruded from the nozzle of the glue gun. The glue gun should move evenly and slowly to ensure that the adhesive base is fully in contact with the sealant and prevent bubbles or holes from moving too fast.
Apply clear glue to the scraper (easy to clean later) and modify the surface with the scraper before dry use.
Tear off the paper.
Hard tube sealant use steps
Poke the sealing bottle and cut the nozzle with proper diameter.
Open the bottom of the sealant like a can.
Screw the glue nozzle into the glue gun.
